Colorless and odorless Hranifix Premium contact adhesive stands out with a high dry residue content (38–42%) and low solvent content, ensuring excellent adhesion within minutes. No additional maintenance is required. The adhesive bond is resistant to water and heat up to +130 °C.
CAN BOND:
* ABS edges;
* wood, chipboard;
* MDF and DTD;
* polyurethane foam, fiberglass;
* laminate;
* cardboard, most plastics;
* aluminum sheets and most metals;
* PVC flooring and other materials.
USE:
Apply adhesive to both surfaces to be bonded. They must be clean, dry, and dust-free. Room and material temperature – +15 °C to +25 °C. Spray adhesive 15–25 cm away from surfaces. Cover 80–100% of the surface with a thin and even layer. Optimally covered surface looks like a fine mesh. Do not apply in thick layers, as excess will squeeze out at the edges. Once the surfaces are covered, allow to dry for about 30–60 seconds (the layer no longer sticks to hands). When the solvent has evaporated, press surfaces firmly together; a press may be used. For poorly absorbent surfaces, it is recommended to apply a second coat after the first has dried to increase bond strength.
SHELF LIFE: 18 months if stored in original hermetically sealed packaging in a dry, cool, and well-ventilated place. Protect from direct sunlight or temperatures above +50 °C. High temperatures may cause explosion. Do not damage empty canisters or throw them into fire.
